How do I Remove and Replace My 1977 Sofa Covers?

Removing and Replacing the fabric covers on your 1977 sofa modules is a straightforward process designed to be user-friendly, allowing you to keep your sofa looking fresh and stylish:

Follow these simple steps to remove and replace the covers:

1. Chair Module

Removing the Cover

1. Turn Over: Place the chair with the base facing up.
2. Remove Legs: Unscrew and remove the chair legs.
3. Unzip Cover: Locate and unzip the cover.
4. Open Velcro: Carefully open the Velcro tabs.
5. Remove Cover: Gradually remove the cover from front to back.

Installing the New Cover

1. Align Panels: Line up the new cover's side panels with the module.
2. Feed Fly: Insert the fly through the back of the module base.
3. Close Velcro: Securely close the Velcro tabs.
4. Position Cover: Work the cover under the module from back to front, compressing foam as needed.
5. Zip Up: Turn the module over and zip up the cover.
6. Reinstall Legs: Attach the legs and set the module upright.

2. Corner Module

Removing the Cover

1. Turn Over: Place the corner module with the base facing up.
2. Remove Legs: Unscrew and remove the base legs.
3. Unzip Cover: Locate and unzip the cover.
4. Open Velcro: Carefully open the Velcro tabs.
5. Remove Cover: Start from the front and remove the cover to the back.

Installing the New Cover

1. Align Panels: Line up the new cover's side panels with the module.
2. Feed Fly: Insert the fly through each side.
3. Close Velcro: Securely close the Velcro tabs.
4. Position Cover: Work the cover under the module from back to front, compressing foam as needed.
5. Zip Up: Turn the module over and zip up the cover.
6. Reinstall Legs: Attach the legs and set the module upright.

3. Chaise Module

Removing the Cover

1. Turn Over: Place the chaise with the base facing up.
2. Remove Legs: Unscrew and remove the chair legs.
3. Unzip Cover: Locate and unzip the cover.
4. Open Velcro: Carefully open the Velcro tabs.
5. Remove Cover: Gradually remove the cover from front to back.

Installing the New Cover

1. Align Panels: Line up the new cover's side panels with the module.
2. Feed Fly: Insert the fly through the back of the module base.
3. Close Velcro: Securely close the Velcro tabs.
4. Position Cover: Work the cover under the module from back to front, compressing foam as needed.
5. Zip Up: Turn the module over and zip up the cover.
6. Reinstall Legs: Attach the legs and set the module upright.

For new covers or additional assistance, contact our King Care Team here